Here’s the latest, easy-to-follow method (as of mid‑2025) to flash stock ROM on a Realme phone using the official Realme Flash Tool (aka Realme Support Tool). I’ll explain in everyday language and include detailed visuals for each step.
What You’ll Need
- A Windows 7/8/10/11 PC
- USB cable & your Realme phone with ~50% battery
- Official Stock ROM (.ofp file) for your exact phone model
- Realme Flash Tool (portable .exe)
- USB ADB/Fastboot drivers
Step-by-Step Guide
Step 1: Install the Tool and Drivers
- Extract the Realme Flash Tool ZIP, open Realme Flash.exe. It usually bundles the necessary drivers.
Step 2: Download and Unpack ROM
- Get the correct
.ofpfirmware for your phone model. - Extract the
.ofpfile to a folder you can find easily.
Step 3: Launch the Flash Tool
- Run Realme Flash.exe.
- Click Browse and select your
.ofpfirmware file.
Step 4: Boot Phone into Fastboot Mode
- Switch off your Realme phone.
- Press and hold Power + Volume Down until the Fastboot screen appears.
Step 5: Connect Your Phone
- Plug your phone into the PC via USB.
- In the Realme Flash Tool, press Load (or “Refresh”) to detect the device.
Step 6: Start Flashing
- Click Flash, confirm when prompted.
- The tool will install the firmware (takes a few minutes)—don’t disconnect!
Step 7: Finished!
- You’ll see a “Flash Successful” message.
- The phone will reboot into the stock ROM—first boot may be a bit longer.
Friendly Reminders
- Backup your data! Flashing erases everything.
- Only use the correct firmware file for your exact model.
- The bootloader must be unlocked, or flashing won’t work.