Get the official stock firmware for Realme 11 Pro+ 5G (Model: RMX3741), based on RealmeUI and Android 15. The Stock firmware is the official software that comes pre-installed on your Realme device. Flashing the stock ROM can help you fix common software issues like:
✅ Your phone is bricked, stuck in a bootloop, or won’t turn on
✅ You forgot your password, PIN, or pattern
✅ You want to upgrade/downgrade your software
✅ You’re fixing bugs, crashing apps, or a sluggish device
✅ You need to remove FRP (Google account lock)
🔔 Note: This page shows only one firmware update for the selected model. If you’re searching for a different version or another Realme model, 👉 [click here to browse all available downloads].
📦 Download Realme 11 Pro+ 5G Firmware (Stock ROM)
Device Name: Realme 11 Pro+ 5G
Model Number: RMX3741
Firmware Version: RMX3741export_11_15.0.0.700EX01_2025051419010000.zip [Latest]
UI Version: realme UI 6.0
Android Version: 15
Region: India/Global
File Size: 18.58 GB
File Format: .zip
Project No: 22711
Status: Official
Device Name: Realme 11 Pro+ 5G
Model Number: RMX3741
Firmware Version: RMX3741export_11_15.0.0.700EX01_2025051419000194.zip [Latest]
UI Version: realme UI 6.0
Android Version: 15
Region: India/Global
File Size: 32.3 GB
File Format: .zip
Project No: 22710
Status: Official
About Realme 11 Pro+ 5G
Realme 11 Pro+ is powered by the MediaTek Dimensity 7050 (6nm) chip and runs on Android 13 with Realme UI 4.0. It has 12GB RAM and 1TB storage but no SD card slot. The phone features a 5000mAh battery with 67W fast charging.
How to Flash Firmware Stock ROM on Realme 11 Pro+ 5G
Required:
- MSM Download Tool (Recommended for EDL Mode)
- Realme Flash Tool (Fastboot mode – Some versions may not support all models)
- SP Flash Tool
- MediaTek USB Drivers
Flashing Instructions:
- Install MTK USB VCOM drivers on your PC.
- Extract the firmware zip. Find the
scatter.txtfile inside the firmware folder. - Open SP Flash Tool.
- Click “Choose” next to the “Scatter-loading File” option and select the
scatter.txt. - Set Download Only or Firmware Upgrade mode.
- Turn off your phone completely.
- Click Download in SP Flash Tool.
- Connect the phone to the PC via USB.
- The flashing will begin automatically. Wait for a green checkmark.
- Disconnect and power on your device.
If the phone doesn’t connect, try holding Volume Down while plugging in the USB.
Important Notes
- Make sure your phone has at least 50% battery
- Use a good-quality or original USB cable
- Back up your data – this process erases everything
- Do NOT interrupt the process once it starts
- Only use firmware designed for Realme 11 Pro+ 5G
🤝Need help with flashing or getting tools? You can contact us or leave a comment below.